Easy and speedy deep drawing of crown caps. Inexpensive and long-proven system with special plastic foils.

For lower-jaw partial denture frames

The rounded upper edge and concave shaping facing the tongue along with the anatomical lower- jaw profile provide for good acceptance among patients. Length: 17 cm, color: green.

Profile rod attachment

CE 0197

Applications: partial dentures, extracoronal, activating by changing the female part. Male mould also available in 45°. Dimensions: bar length 6 mm, head diameter 1.75 mm

The art of precision at your fingertips with these extremely lightweight, aluminum shaft P.K. Thomas designed instruments.

Color-coded for easy identification, stainless steel tips for durability and affordably priced for lasting value.

Wetting agent for investment and relief of silicone duplicating moulds

Reliable preparation agent for investment, eliminates the water-repellent effects of the wax-up and thus ensures smooth casting surfaces. This applies to modeling crowns and bridges as well as for partial dentures. Application is easy. Aurofilm is sprayed on evenly. Always blow-dry prior to investment. Wet Aurofilm areas may cause rough casting surfaces.

For prosthetics with CE Marking

CE

Sheets of pink wax for modeling the bases of dentures and the acrylic saddle supporting the teeth as well as for occlusal registration. Easy to shape, but stable with respect to temperature during trial insertion.

Small, red

Eliminates fixing and grinding of the investment models when the BEGO combination duplicating flask is used. Both mould formers can also be used with all other duplicating systems.

• Easy to clean.
• Durable silicone ring.
• Suitable for all investment materials for pressed ceramics systems.

Availability: BEGO-Press investment system 1 set consisting of mould base, silicone ring and mould cover.

For crown and bridge work

For making moulds with metal mould rings. With hard rubber base plate.

• Press-Ingot CPO2, CPO 3, CPO 4, CPO 6, je 5 x 2 g
• Correction Material CPO2, CPO3, CPO4, CPO6, je 4 g
• Correction Material LF Clear, LF Enamel, je 4 g
• Individual Opaquer violet, orange-brown, brown, white, pink, 4 g each

Introductory set with all the required BeCe PRESS components

• The Start-Kit provides a complete set of working materials for reproducing the most important V-shades A2, A3, A3.5, B2, B3 and D3

Test BeCe PRESS!

• The BeCe PRESS Test-Kit contains all components for fabricating a restoration in tooth shade A3
• Includes 30 g Wirobond 280

Extracoronal anchor

CE 0197

Applications: partial dentures, extracoronal. Dimensions: height 4 mm, with female part 4.2 mm, head diameter 2 mm. 1 set consisting of: 2 male parts, white, acrylic, 2 male part caps (palladium alloy), 2 female duplicating parts, brown, acrylic, 2 impression caps, dark blue, acrylic, 2 model pins, grey, acrylic, 2 female parts, yellow, low removal force, acrylic, 2 female parts, orange, medium removal force, acrylic, 2 female parts, blue, high removal force, acrylic, 1 insertion pin, blue, acrylic, 2 fixing instruments, black

Refractory material for ceramic inlays, onlays and veneers

BEGOform creates a precise appliance with extremely firm edges and a smooth surface. Complete with 1 measuring syringe and 250 ml of mixing liquid. Compatible with most ceramic materials on the market today.

Mixing liquids for BEGO investment materials. Mixing liquid for Wiroquick, Wiroplus® N, Wiroplus®, Wiroplus® S, Wirovest®, Bellavest® T and Bellasun.

Depending on the alloy and area of application, BegoSol® can be mixed with distilled or demineralized water to the concentration required. The higher the concentration of BegoSol®, HE or K, the greater the expansion of the investment material.

Special mixing liquid for Bellavest® SH and Bellavest® T

Depending on the alloy and area of application, BegoSol® can be mixed with distilled or demineralized water to the concentration required. The higher the concentration of BegoSol®, HE or K, the greater the expansion of the investment material.

Special mixing liquid for WiroFine and BellaStar XL

Depending on the alloy and area of application, BegoSol® can be mixed with distilled or demineralized water to the concentration required. The higher the concentration of BegoSol®, HE or K, the greater the expansion of the investment material.

Super hard plaster

• Type 4 super hard plaster for making models for inlays, crowns, bridges and partial dentures.
• Super hard plaster with controlled batch constancy for reproducible results every time.
• Outstanding flow properties enable bubble-free pouring.
• Tixotropic plaster: can be built up immediately and already has outstanding flow properties when subjected to light vibrations.
• High degree of batch constancy thanks to complete quality management.
• Maximum reproduction accuracy with all commonly used duplicating materials.
• Extremely high bending tensile strength: considerable resistance against breaking-off of teeth and stumps.
• Abrasion-resistant thanks to high degree of hardness.
• Ideal linear expansion of 0,09 %.
• Very smooth model surfaces.
• Advantageous processing time of around 5 minutes.
• Preparation limits and fine details can be seen particularly clearly thanks to advantageous color, ivory 35.

Quick modeling wax pontics

Anatomically designed, in 15 different shapes.

• Ideal way of facilitating modeling work.
• Time savings.
• Simple handling and easy processing.
• Anatomic design.
• Individually adaptable.
• Excellent aesthetics.
• Optimal wax hardness for very good stability.
• Practical starter set, refillable.

The premium investment material for precious and semi-precious crowns and bridges

Versatile, universal, with extremely precise casting results.

• Extremely fine grain with excellent fitting accuracy.
• Ideal for precious and semi-precious metal alloys.
• Fluid to creamy consistency with optimal flow properties.
• Reliable expansion control with BegoSol® K.
• Outstanding deflasking characteristics, extremely smooth casting surfaces.
• For conventional or shock-heat processing.
• Can be processed with metal or ringless systems.

Phosphate-bounded soldering investment material

It is dimensionally stable, does not tend to slump and is suitable for the high soldering temperatures. Bellatherm® provides for extremely firm edges as well as excellent fitting accuracy and can be washed off the soldered object under running water.

The reliable choice for universal C&B investments. Excellent for precious, semiprecious, non-precious alloys and pressable ceramics.

With Bellavest® SH you can cover the entire spectrum of dental alloys, except titanium. Outstanding casting results with non-precious alloys, such as Wirobond® C; but also suitable for precious-metal alloys. Easy to process with BegoSol® HE. Graphite-free, phosphate-bonded. Processing time 5 minutes. Extremely smooth casting surfaces. Hardens with firm edges, easy to deflask.

Graphite-free crown & bridge precision casting investment material for precious and non-precious metal applications

Tried and tested in fitting accuracy and processing. Firm edges and easy to deflask. Can only be heated conventionally.

For partial denture technique

This wax was developed for blocking out under-cuts, creating clasp steps and relieving critical model areas. It is easy to scrape and cut, boiling-out temperature from 90 °C, setting temperature approx. 68 °C. This wax adheres firmly to the model and retains its shape even during soaking and duplicating till 54 °C.

CE 0197

Applications: intracoronal, partial dentures, resilient over root cap. Dimensions: overall height: 4 mm, mounting plate: thickness: 0.4 mm, female part: diameter 3.6 mm. 1 female part: platinous gold, 1 male part: platinous gold, 1 spacer: PVC, 1 mounting plate: tin.

The quality of the material and the cutting geometry ensure high degree of removal and long service life. The cutters meet the ISO standard and are equally suitable for both plastic and metal.

For flame melting

Melting crucible, shallow trough, for cobalt-chrome partial denture alloys and non-precious alloys that can be used with Fundor, Fundor T, Castor and Pollux with double centrifugal arm.

For flame melting

The melting crucibles are made of ceramic material containing quartz and have a long service life. Melting crucible for precious-metal alloys for Fundor, Fundor T, Castor and Pollux with double centrifugal arm.

For Fornax® ceramic melting crucible

Accessory for Fornax® G (No. 25080, 25085 & 25095).

Special wax for modeling cervical edges of crowns, precision parts and inlays. Tension-free and soft flowing.

Soldering rods for all cobalt-chrome partial denture alloys.

Melting interval: 1150-1100 ºC, Soldering temperature: 1180 ºC, Flux: Fluxsol.

BeCe PRESS Correction Material

• Correction materials matched to the ingot shades for minor adjustments, e.g. adding to contact points.

Correction materials for pressed dentine cores, also for customization before the incisal build-up

• BeCe PRESS

Low-fusing correction material for any adjustments required after customized build-up using enamel, transparent and opal incisal porcelains.

• BeCe PRESS

Exclusively from BEGO USA

Margin Wax has a low melting temperature and is easy to burnish without shrinkage. The Foundation wax is ideal for implant case wax-ups, small copings and crown and bridge blockout. Inlay wax specially formulated for precise carvability. Milling wax mills to a high luster and does not chip or crack during the process.

Crown & Bridge Attachment DVD

High-quality hard and medium-hard wax for modelling in connection with crown and bridge technique. Ideal scraping properties, rapid hardening after application, easy to shape.

Diamond polishing compound

Diapol polishes even the hardest alloys and ceramics. Can also be used for repair work, when corrections in ceramics have to be polished and glazing is not possible. Economical in use: approx. 3 mm compound is sufficient for a 3-unit bridge.

Green

For making wax caps for crowns and bridges. Working temperature 70 - 75 °C.

Multifunctional due to the combination of a microblaster and recirculation sandblaster

• Integrated LED lighting in the handpiece for an optimal shadow-free view during preparation, even intracoronally
• For thorough removal of investment and oxides to prevent undesired biological reactions with the patient
• LED lighting in the sandblasting chamber provides a service life ten times higher than that of conventional lamps for cost-effective sandblasting and reduces maintenance costs
• Combines the features of 2 units in one and provides the advantages of a microblaster and recirculation sandblaster. Duostar is therefore the ideal, cost-effective investment for small and medium laboratories

Modelling spray

Durofluid hardens the duplicate model and permits the wax-up to adhere better.

Dipping hardener

CE

Durol and Dipfix, which contains no solvents, are used cold and penetrate very well into the surface of duplication models during hardening: the latter become hard and smooth. 25 % time and energy savings because 150 °C preheating temperature is sufficient.

For a perfect view during preparation

• Refined technology and high degree of reliability due to durability of pneumatic components.
• For thorough removal of investment and oxides to prevent undesired biological reactions with the patient
• LED technology allows for detecting cracks in the ceramic during sandblasting with the aid of the LED technology - improves quality management and avoidance of complaints at a later stage
• LED lighting in the sandblasting chamber has a service life ten times higher than that of conventional lamps for cost-effective sandblasting
• CThe new EasyBlast can be upgraded to a 4-chamber sandblaster by adding 2 other sandblasting modules
• Intelligent colour coding system on the tanks and in the sandblasting chamber make it impossible to mix up the blasting media
• EasyBlast basic is a version of EasyBlast, but without the LED technology in the handpiece

The intelligent electrolytic polishing unit.

Automatically calculates polishing time for up to two objects.

• Innovative new heating concept quickly brings the unit up to operating temperature.
• Major time-saving due to simultaneous polishing of two Co-Cr partial dentures.
• New, user-friendly operating panel with display and soft keys.
• Indicator to show when the solution in the polishing bath is in need of change.
• Easy drainage of tank via drain hose.
• Excellent polishing results ensured by uniform movement of the polishing bath.
• Includes a supplementary cathode for objects with a deep palate.
• Uniform polishing effect achieved by automatic current stabilization.

Electrolytic polishing unit for one cobalt-chrome casting

CE

Fast, safe and extremely reliable.

• Simultaneous polishing of two cobalt-chrome castings.
• Superb polishing results through object movement, bath heating and the extremely efficient ring cathode.
• Supplementary cathode for objects with deep palate sections.
• Quick-acting short-circuit cutout.
• Automatic current control with three power settings.
• High degree of safety through firm contact with object clamps.
• Speedy completion of polishing work in only 2 x 4-6 minutes.
• LED current indicator and timer.
• Eltropol E is the tried and tested, low-cost alternative for polishing of one casting at a time

Grain size 120

Very firm bonding of the corundum to the base material makes this emery cloth very effective and durable.

For completing the natural incisal section in the build-up technique.

• BeCE PRES

The BEGO fleecy inlay strips for moulds contain no asbestos. They burn without residue and provide room for the investment material to expand.

Flux

Ready for immediate use in soldering precious-metal and non-precious metal alloys.

For melting of precious metal alloys

Improved Crucibles

Centrifugal- induction casting machine

The ultimate centrifugal benchtop casting unit

• Compact benchtop casting machine with very efficient induction heating (semiconductor generator)
• Considerable power reserves with only 16 ampere power consumption, casting temperature up to 1550 °C: ideal for all dental alloys (except titanium)
• Cooling through direct connection to water supply and outlet
• Infrared controlled for short heating time
• Time-saving adjustment to different mould sizes through newly designed setting mechanism
• Easy-to-handle taring device for different mould weights

Benchtop casting machine for torch melting

• Casting of all dental alloys (except titanium).
• Rugged, maintenance-free motor with long service life.
• Double-jointed arm enables constant casting quality.
• Variable starting speed.
• Quick-clamping device for fast and secure insertion of crucibles and moulds.
• Durable ceramic melting crucible for all alloys.
• High degree of safety due to cover lock. Meets OSHA standards.
• High degree of stability: additional fastening devices not necessary.
• Variable mould holder.

For combination crucible (2)

Funnel former with reservoir for combination crucible.

For the other funnel

It is used when there is insufficient space for the other funnel former.

Hydrocolloid duplicating unit with smart sensor technology.

• Advanced software allows temperatures to be easily changed and stored for consistent results.
• With four heating zones the Gelovit 200 can be cycled in 4 hours.
• The large easy to read display pad shows the stage of operations with just a quick glance.
• A built in 99 hour timer allows for delay starts and allows the Gelovit 200 to be shut off over the weekends.
• Three temperature sensors ensure temperature accuracy within 1-2 °F.
• Programmable counter can keep track of the number of melt downs of your hydrocolloid to ensure consistency.
• Pre-heating and delayed motor starting features prolong the live of gearbox and motor

There are two gingival porcelains available with a natural opalescence for adding gingival sections, especially in implant prosthetics or in the pontic region

• BeCe PRESS

Glass carbon cylinder for Nautilus® ceramic melting crucibles

For the melting of precious metal alloys including alloys with high palladium content.

Gel glaze paste for glaze firing BeCe PRESS restorations

Lightweight, durable plastic beakers

BEGO's graduated liquid measuring beakers are great for consistently measuring your investment liquids. Each beaker is clearly printed and legible.

For Fornax® ceramic melting crucibles

For Fornax® ceramic tilting crucibles

With wide guide: Length: 130 mm, cutting width: 0.4 mm.

Quality burs for milling, in wax shaping, and metal finishing of frameworks.

Available in single and double fluted as well as 0, 2, 4. and 6 degree tapers. Burs are ideal for combination cases or milled implant structures and fit most hand pieces or milling units.

Quality burs for milling, in wax shaping, and metal finishing of frameworks.

Available in single and double fluted as well as 0, 2, 4. and 6 degree tapers. Burs are ideal for combination cases or milled implant structures and fit most hand pieces or milling units.

Quality burs for milling, in wax shaping, and metal finishing of frameworks.

Available in single and double fluted as well as 0, 2, 4. and 6 degree tapers. Burs are ideal for combination cases or milled implant structures and fit most hand pieces or milling units.

Quality burs for milling, in wax shaping, and metal finishing of frameworks.

Available in single and double fluted as well as 0, 2, 4. and 6 degree tapers. Burs are ideal for combination cases or milled implant structures and fit most hand pieces or milling units.