Equipment and Accessories

Crown & Bridge Attachment DVD

Combination blasting unit with two fine-jet pencils and integrated gross devesting nozzle.

CE

• Ergonomic design for a relaxed working position and great hand freedom thanks to the slanting design of the housing sides and large openings.
• Gross devesting nozzle recirculates material from the fine blasting tips.
• Rugged metal housing, easy foot pedal operation.
• Two fine-jet pencils for precise blasting work, blasting material from tips is not recycled.
• Fine-jet pencils can be used in for different blasting material grain sizes:50 - 250 micron.
• Ideal as blasting station for small- and medium-sized laboratories.

Economic fine-tip blasting unit

Easy to operate, versatile and ergonomic.

• Refined technology and high degree of reliability due to durability of pneumatic components.
• Two blasting material containers with proven blasting material dispensing system.
• Rugged pencils with interchangeable tips for different grain sizes.
• Safety glass with profile lock for easy window replacement.
• Can be connected to central or single workstation extraction systems.
• Fatigue-free work thanks to ergonomic housing design.

The intelligent electrolytic polishing unit.

Automatically calculates polishing time for up to two objects.

• Innovative new heating concept quickly brings the unit up to operating temperature.
• Major time-saving due to simultaneous polishing of two Co-Cr partial dentures.
• New, user-friendly operating panel with display and soft keys.
• Indicator to show when the solution in the polishing bath is in need of change.
• Easy drainage of tank via drain hose.
• Excellent polishing results ensured by uniform movement of the polishing bath.
• Includes a supplementary cathode for objects with a deep palate.
• Uniform polishing effect achieved by automatic current stabilization.

Electrolytic polishing unit for one cobalt-chrome casting

CE

Fast, safe and extremely reliable.

• Simultaneous polishing of two cobalt-chrome castings.
• Superb polishing results through object movement, bath heating and the extremely efficient ring cathode.
• Supplementary cathode for objects with deep palate sections.
• Quick-acting short-circuit cutout.
• Automatic current control with three power settings.
• High degree of safety through firm contact with object clamps.
• Speedy completion of polishing work in only 2 x 4-6 minutes.
• LED current indicator and timer.
• Eltropol E is the tried and tested, low-cost alternative for polishing of one casting at a time

Centrifugal- induction casting machine

The ultimate centrifugal benchtop casting unit

• Compact benchtop casting machine with very efficient induction heating (semiconductor generator)
• Considerable power reserves with only 16 ampere power consumption, casting temperature up to 1550 °C: ideal for all dental alloys (except titanium)
• Cooling through direct connection to water supply and outlet
• Infrared controlled for short heating time
• Time-saving adjustment to different mould sizes through newly designed setting mechanism
• Easy-to-handle taring device for different mould weights

Benchtop casting machine for torch melting

• Casting of all dental alloys (except titanium).
• Rugged, maintenance-free motor with long service life.
• Double-jointed arm enables constant casting quality.
• Variable starting speed.
• Quick-clamping device for fast and secure insertion of crucibles and moulds.
• Durable ceramic melting crucible for all alloys.
• High degree of safety due to cover lock. Meets OSHA standards.
• High degree of stability: additional fastening devices not necessary.
• Variable mould holder.

Hydrocolloid duplicating unit with smart sensor technology.

• Advanced software allows temperatures to be easily changed and stored for consistent results.
• With four heating zones the Gelovit 200 can be cycled in 4 hours.
• The large easy to read display pad shows the stage of operations with just a quick glance.
• A built in 99 hour timer allows for delay starts and allows the Gelovit 200 to be shut off over the weekends.
• Three temperature sensors ensure temperature accuracy within 1-2 °F.
• Programmable counter can keep track of the number of melt downs of your hydrocolloid to ensure consistency.
• Pre-heating and delayed motor starting features prolong the live of gearbox and motor

Microprocessor-controlled preheating furnace for crowns, bridges and partial dentures

Ideal for every Crown and Bridge department.

• Microprocessor-controlled temperature regulation with digital display.
• Maximum preheating temperature up to approx. 1100 ºC.
• Maximum capacity of the mould compartment with the 100 MP: 12 -2 1/2" 180 g C&B moulds or 4 520 g partial denture moulds
• Up to 9 individual programs can be set.
• Up to 4 temperature holding levels can be entered.
• Programmable heating rate, linear heating rate of 1 - 9ºC/minute, 33.8 - 48.2 °F/minute.
• Programmable time for desired casting readiness, visual and acoustic signal for end of program.
• Corrosion-resistant, stainless steel exterior.

Microprocessor-controlled preheating furnace for crowns, bridges and partial dentures

Ideal for every Crown and Bridge department.

• Microprocessor-controlled temperature regulation with digital display.
• Maximum preheating temperature up to approx. 1100 ºC.
• Maximum capacity of the mould compartment with the 100 MP: 12 -2 1/2" 180 g C&B moulds or 4 520 g partial denture moulds
• Up to 9 individual programs can be set.
• Up to 4 temperature holding levels can be entered.
• Programmable heating rate, linear heating rate of 1 - 9ºC/minute, 33.8 - 48.2 °F/minute.
• Programmable time for desired casting readiness, visual and acoustic signal for end of program.
• Corrosion-resistant, stainless steel exterior.

The vacuum mixer for all your laboratory needs

• For the mixing of investment and refractory materials, plaster, and duplicating silicone.
• 100 mbar vacuum output eliminates air bubbles trapped in the mixing material and prevents, at the same time, the development of boiling bubbles.
• Vacuum mixing bowls are fixed to the agitator coupling by means of a vacuum.
• Transparent vacuum mixing bowls in the sizes 250 ml, 550 ml, 835 ml, and 1200 ml.
• An electronic timer controls the mixing time with great accuracy and the digital display always shows the current vacuum in the mixing bowl.
• Spatula and mixing bowl geometry have each been optimized for both the investment and the duplicating silicon processing.
• Wall mountable.
• An attractively designed tabletop stand is available as an accessory for use as bench top unit.

The Automatic Vacuum Mixer

• Automatic vacuum mixing unit for the mixing of investment and refactory materials, plaster, and duplicating silicone
• Mixing program controlled with pre-programmed mixing parameters or manual mix override
• Vacuum mixing bowls are fixed to the agitator coupling by means of a vacuum
• Pre-programmed mixing programs take the chemical and physical requirements of the mixing material into account
• Program parameters for initial spatulation,mixing, pre and post-vacuum: rotational speed, rotational direction and time
• The Motova 300 has user friendly programming with only 3 buttons
• The 2-line display shows all program parameters, including the individually programmed ones, and also displays the requested product names
• Spatula and mixing bowl geometry have each been optimized for the investment and the duplicating silicone processing
• Wall mountable
• An attractively designed tabletop stand is available as an accessory for the use as a bench top unit

Automatic vacuum/pressure casting unit.

CE

Precision surveyor with detachable table

• Precision bearings at all joints.
• Two horizontal joints (double hinged arm).
• Twofold vertically adjustable working level.
• Solid baseplate for 360 ° stability.
• Detachable precision model table with secure model locking device.
• Model table and tool holding fixture can be swiveled 360 °.
• Model holding plate can be swiveled with 0 ° lock.
• Use of a second work table possible.

Instrument for infinitely variable measurement of undercuts

• Parameter can be used for parallelometers such as BEGO's Paraflex.
• Shaft thickness approx. 3 mm.
• Infinitely variable measurement of undercuts: any required intermediate value can be measured.
• Precise measured value display: planned load applied to clasps is complied with.
• Rounded tip of measuring probe: trouble-free handling, no damage to model surface.

Multifunctional milling unit

Compact, precise and universal milling machine.

• Locking of joints via magnets.
• Milling arm designed as multi-functional arm.
• Lever for lowering the drilling tool.
• Control for the milling unit motor integrated in base.
• Milling spindle with speeds up to 30,000 RPM and quick-action tool chuck.
• Drilling depth stop with micrometer screw 1/100 mm.
• Selector switch for clockwise or anticlockwise operation.
• Ideal for milling and drilling in wax.
• Extremely rugged, precision-made model table.
• Precision quill for attaching accessories, measuring, etc., can be fixed directly to milling arm if not used.
• Electromagnetic locking of model table.

Fully automatic blasting unit

Fast and efficient

• Solid technology, ergonomically oriented design
• Relaxed working position thanks to slanting design of the housing sides
• Great hand freedom thanks to large openings
• Extremely rugged metal housing for continuous operation
• Unobstructed view of object to be blasted through air separation of the blasting material, always optimal proportion of blasting material in the air flow
• Up to 6 partial dentures can be automatically blasted at the same time in 15 - 20 minutes
• Freely selectable blasting time from 1 - 60 minutes
• Magnetized door: when opened, the blasting operation is interrupted
• Good illumination of the blasting chamber through a dust-protected tubular lamp
• To be connected to a central suction extraction system

Precision blasting module

Starlet is used for cleaning, roughening and blast-polishing the frames for metal-to-ceramic work and extensive areas of dental technology. It is a low-cost module that sensibly complements an existing corundum blasting unit with two hand openings or is used in a blasting chamber. The blasting material is used only once. Starlet can be employed for different BEGO blasting material thanks to interchangeable fine blasting jets. Must not be used with a blasting chamber not equipped with suction extraction.

Wet and steam cleaner

Environmentally sound and versatile.

• High-performance unit with both wet and dry steam settings.
• Fixed water connection for endless steam.
• Steam pressure of approx. 45 psi for gentle but thorough cleaning.
• High degree of safety through fixed connections consisting of copper tubing.
• Corrosion-resistant housing made of special steel and plastic.
• Well-insulated spray gun with pressure switch facilitates work.
• Water monitoring device stops water supply immediately in the event of leaks.

The premier pressure vessel for bubble-free investing.

The Wiropress® SL is a pressure vessel designed to reduce the size and number of voids and bubbles in finished castings, acrylic resins, investments, and duplicating materials.