Merchandise

Easy and speedy deep drawing of crown caps. Inexpensive and long-proven system with special plastic foils.

For lower-jaw partial denture frames

The rounded upper edge and concave shaping facing the tongue along with the anatomical lower- jaw profile provide for good acceptance among patients. Length: 17 cm, color: green.

Profile rod attachment

CE 0197

Applications: partial dentures, extracoronal, activating by changing the female part. Male mould also available in 45°. Dimensions: bar length 6 mm, head diameter 1.75 mm

The art of precision at your fingertips with these extremely lightweight, aluminum shaft P.K. Thomas designed instruments.

Color-coded for easy identification, stainless steel tips for durability and affordably priced for lasting value.

Wetting agent for investment and relief of silicone duplicating moulds

Reliable preparation agent for investment, eliminates the water-repellent effects of the wax-up and thus ensures smooth casting surfaces. This applies to modeling crowns and bridges as well as for partial dentures. Application is easy. Aurofilm is sprayed on evenly. Always blow-dry prior to investment. Wet Aurofilm areas may cause rough casting surfaces.

For prosthetics with CE Marking

CE

Sheets of pink wax for modeling the bases of dentures and the acrylic saddle supporting the teeth as well as for occlusal registration. Easy to shape, but stable with respect to temperature during trial insertion.

• Easy to clean.
• Durable silicone ring.
• Suitable for all investment materials for pressed ceramics systems.

Availability: BEGO-Press investment system 1 set consisting of mould base, silicone ring and mould cover.

For crown and bridge work

For making moulds with metal mould rings. With hard rubber base plate.

• Press-Ingot CPO2, CPO 3, CPO 4, CPO 6, je 5 x 2 g
• Correction Material CPO2, CPO3, CPO4, CPO6, je 4 g
• Correction Material LF Clear, LF Enamel, je 4 g
• Individual Opaquer violet, orange-brown, brown, white, pink, 4 g each

Introductory set with all the required BeCe PRESS components

• The Start-Kit provides a complete set of working materials for reproducing the most important V-shades A2, A3, A3.5, B2, B3 and D3

Test BeCe PRESS!

• The BeCe PRESS Test-Kit contains all components for fabricating a restoration in tooth shade A3
• Includes 30 g Wirobond 280

Extracoronal anchor

CE 0197

Applications: partial dentures, extracoronal. Dimensions: height 4 mm, with female part 4.2 mm, head diameter 2 mm. 1 set consisting of: 2 male parts, white, acrylic, 2 male part caps (palladium alloy), 2 female duplicating parts, brown, acrylic, 2 impression caps, dark blue, acrylic, 2 model pins, grey, acrylic, 2 female parts, yellow, low removal force, acrylic, 2 female parts, orange, medium removal force, acrylic, 2 female parts, blue, high removal force, acrylic, 1 insertion pin, blue, acrylic, 2 fixing instruments, black

Quick modeling wax pontics

Anatomically designed, in 15 different shapes.

• Ideal way of facilitating modeling work.
• Time savings.
• Simple handling and easy processing.
• Anatomic design.
• Individually adaptable.
• Excellent aesthetics.
• Optimal wax hardness for very good stability.
• Practical starter set, refillable.

For partial denture technique

This wax was developed for blocking out under-cuts, creating clasp steps and relieving critical model areas. It is easy to scrape and cut, boiling-out temperature from 90 °C, setting temperature approx. 68 °C. This wax adheres firmly to the model and retains its shape even during soaking and duplicating till 54 °C.

The quality of the material and the cutting geometry ensure high degree of removal and long service life. The cutters meet the ISO standard and are equally suitable for both plastic and metal.

Special wax for modeling cervical edges of crowns, precision parts and inlays. Tension-free and soft flowing.

Soldering rods for all cobalt-chrome partial denture alloys.

Melting interval: 1150-1100 ºC, Soldering temperature: 1180 ºC, Flux: Fluxsol.

BeCe PRESS Correction Material

• Correction materials matched to the ingot shades for minor adjustments, e.g. adding to contact points.

Correction materials for pressed dentine cores, also for customization before the incisal build-up

• BeCe PRESS

Low-fusing correction material for any adjustments required after customized build-up using enamel, transparent and opal incisal porcelains.

• BeCe PRESS

Exclusively from BEGO USA

Margin Wax has a low melting temperature and is easy to burnish without shrinkage. The Foundation wax is ideal for implant case wax-ups, small copings and crown and bridge blockout. Inlay wax specially formulated for precise carvability. Milling wax mills to a high luster and does not chip or crack during the process.

High-quality hard and medium-hard wax for modelling in connection with crown and bridge technique. Ideal scraping properties, rapid hardening after application, easy to shape.

Diamond polishing compound

Diapol polishes even the hardest alloys and ceramics. Can also be used for repair work, when corrections in ceramics have to be polished and glazing is not possible. Economical in use: approx. 3 mm compound is sufficient for a 3-unit bridge.

Modelling spray

Durofluid hardens the duplicate model and permits the wax-up to adhere better.

Dipping hardener

CE

Durol and Dipfix, which contains no solvents, are used cold and penetrate very well into the surface of duplication models during hardening: the latter become hard and smooth. 25 % time and energy savings because 150 °C preheating temperature is sufficient.

For completing the natural incisal section in the build-up technique.

• BeCE PRES

Flux

Ready for immediate use in soldering precious-metal and non-precious metal alloys.

Improved Crucibles

BEGO offers a complete spectrum of wax patterns and sheets for designing any RPD framework.

Wax products range from block-out, wax clasp patterns, smooth and stipple sheet wax, saddle relief wax, wire rods, retention patterns, and sprue forms. The advantages for the wax patterns are that they are self adhering and need no paint-on adhesive layer. Also you are ensured of a 100% clean burn-out of your design with no breakdown of investment and the possibility of flashing on your casting. Wax patterns save time and money when finishing.

For combination crucible (2)

Funnel former with reservoir for combination crucible.

There are two gingival porcelains available with a natural opalescence for adding gingival sections, especially in implant prosthetics or in the pontic region

• BeCe PRESS

Gel glaze paste for glaze firing BeCe PRESS restorations

Lightweight, durable plastic beakers

BEGO's graduated liquid measuring beakers are great for consistently measuring your investment liquids. Each beaker is clearly printed and legible.

For Fornax® ceramic melting crucibles

For Fornax® ceramic tilting crucibles

Quality burs for milling, in wax shaping, and metal finishing of frameworks.

Available in single and double fluted as well as 0, 2, 4. and 6 degree tapers. Burs are ideal for combination cases or milled implant structures and fit most hand pieces or milling units.

Quality burs for milling, in wax shaping, and metal finishing of frameworks.

Available in single and double fluted as well as 0, 2, 4. and 6 degree tapers. Burs are ideal for combination cases or milled implant structures and fit most hand pieces or milling units.

Quality burs for milling, in wax shaping, and metal finishing of frameworks.

Available in single and double fluted as well as 0, 2, 4. and 6 degree tapers. Burs are ideal for combination cases or milled implant structures and fit most hand pieces or milling units.

Quality burs for milling, in wax shaping, and metal finishing of frameworks.

Available in single and double fluted as well as 0, 2, 4. and 6 degree tapers. Burs are ideal for combination cases or milled implant structures and fit most hand pieces or milling units.

Quality burs for milling, in wax shaping, and metal finishing of frameworks.

Available in single and double fluted as well as 0, 2, 4. and 6 degree tapers. Burs are ideal for combination cases or milled implant structures and fit most hand pieces or milling units.

Intensively pigmented opaque for creating increased chroma, e.g. with limited space availability

• BeCe PRES

Separating liquid for crowns and bridges

It separates plaster from wax and metal very effectively. It has particularly proven itself in insulating stumps when wax caps are produced via the dipping process.

The low thermal conductivity of the plastic guarantees stress-free cooling of the duplicating material. Two wedges integrated in the flask cover prevent rotation and ensure proper placement of the form back in the flask.

Special corundum blasting material of 99.6% aluminium oxide (110 µm)

Alpha-corundum with great hardness. The particles retain their angular shape until spent. Korox® meets the provisions of the German employers' liability associations.

Special corundum blasting material of 99.6% aluminium oxide (25 µm)

Alpha-corundum with great hardness. The particles retain their angular shape until spent. Korox® meets the provisions of the German employers' liability associations.

pecial corundum blasting material of 99.6% aluminium oxide (250µm)

Alpha-corundum with great hardness. The particles retain their angular shape until spent. Korox® meets the provisions of the German employers' liability associations.

Special corundum blasting material of 99.6% aluminium oxide (50 µm)

Alpha-corundum with great hardness. The particles retain their angular shape until spent. Korox® meets the provisions of the German employers' liability associations.

Liquid for use with BeCe PRESS correction materials

Opaque liquid for thinning BeCe PRESS opaque paste

Opaque liquid for mixing BeCe PRESS powder opaque

Liquid for use with BeCe PRESS stain and glaze materials

Crucible engobe for Fornax® - and Nautilus® ceramic melting crucibles

This prolongs the life of the crucible and reduces casting residues in the melting crucible.

Ideal for ceramic, quartz or gypsum crucibles

Prolongs the life of the crucible and reduces casting residues in the melting crucible should read A coating of Lolipot greatly increases the life of the crucible, reduces residues and saves wasted alloy left behind after casting.

Exclusively from BEGO USA

Premium waxes that change color to give the technician greater control in placing the was and identifying readiness to carve. A .003 ash content ensures a clean burnout.

Exclusively from BEGO USA

Premium wax that change color to give the technician greater control in placing the wax and identifying readiness to carve. A .003 ash content ensures a clean burnout. Dipping wax properties maintain a uniform thickness after dipping.

Particularly rugged design for all dental applications. Shank diameter 2.35 mm.

Application of the measuring instruments in connection with partial denture technique for model analysis, measuring undercuts and marking the equator.

For crown and bridge work

Metal mould ring size 1 for 60 g of investment material. Long service life thanks to special steel design. Suitable for all BEGO crown and bridge investment materials.

Flux

For soldering precious-metal alloys and precious to cobalt-chrome or nickel-chrome. It saves intermediate soldering and provides strong joints that hold up even under great stress and strain. Minoxyd is also used for soldering metal-to- ceramic alloys in the furnace after firing the ceramic.

Ensures clean, smooth model base without grinding. Two sizes are available for both the upper and the lower jaw.
(U1, U2 = lower jaw, O1, O2 = upper jaw).

Fixed stainless steel tips offer great precision and accuracy in both denture and partial wax-ups.

Lightweight, aluminum shafts and fatigue-free design

The set contains the most important instruments for dental technicians.

For partial denture technique

The set contains the most important instruments for dental technicians. Ideal for trainees! The instruments are also available individually.

These intensively pigmented modifiers can be applied if there is limited space availability or for highly defined characterization in the incisal region. Creative options are unlimited, as the modifiers can be mixed with enamel and transparent porcelains.

• BeCe PRESS

Eliminates fixing and grinding of the investment models when the BEGO combination duplicating flask is used.

Ideal for rational and aesthetic modelling of chewing surfaces. The opaque wax is extremely easy to apply, the contours are clearly displayed already when heated. BEGO occlusal wax does not stain and is not sticky; it burns without residue.

Two intensities of Opal Incisal are available that create a natural, vital opalescence

• BeCe PRESS

Paste opaque with high masking power

• BeCe PRESS paste opaque provides excellent coverage, even in thin layers. It is very easy to use and highly cost-effective.

Powder opaque for BeCe PRESS

• Powder opaque for BeCe PRESS for use as an alternative technique to paste opaque.
• Particularly recommended for alloys containing zinc.

Special polishing compound for precious metal alloys

Also very suitable for "bio alloys". Palapol is economical in use, wax-bonded and provides for clean and extensively dust-free polishing. It contains no harmful quartz. The stick allows easy handling without the usual polishing block residues.

They are particularly resistant. For grinding after separation of sprues.

Blasting material for blast-polishing (125 µm)

Perlablast® consists of tiny lead-free soda glass beads that produce an even silky finish. There is no metal loss because the surface is compacted rather than abraded. No further finishing is required for surfaces that need not be polished. Perlablast® is used for all crown and bridge alloys to give a mat finisch to the chewing surfaces.

Plastic hollow sticks for distribution channels

Hollow sticks are used for non-precious metal alloys and those with reduced precious-metal content in metal-ceramic work. Length 16.5 cm, Ø 5 mm.

These plastic patterns available in the most popular shapes and sizes to meet all applications.

All patterns are self adhesive and transparent green in color to allow technicians to see through to the model for indicator lines.

Please reference the Plastic Patterns Chart in the Resources section below to view an image of a specific pattern

Plastic sticks for sprues

The sticks stabilise wax modelling in precious- metal work, are easily shaped over a flame and burn without residue. Length 16.5 cm, Ø 2.5 mm.

For dry polishing

These compounds are wax-bounded and enable clean and practically dust-free work. They do not contain any harmful quartz.

For partial denture technique

Preparation wax for placement under the saddle is supple and easy to adapt to master models.

BeCe PRESS ingots for the staining technique

• BeCe PRESS allows you to reproduce all 16 Vita shades with only 6 ingots.
• Two ingot sizes (2 and 5 g) ensure maximum flexibility.

Press-Ingots in opacious dentine shade for cut-back technique

• BeCe PRESS

• Time savings in relation to mould systems with foil sleeve, iron ring, etc..
• Compatible with Rapid Wax System.
• Minimal wear, thus lower costs than with comparable systems.
• Universally applicable for many casting systems.
• Easy separation of mould and mould ring.
• For all BEGO crown and bridge investment materials.

H1 (ISO 635 104 107 522 050)

Shank size 2.35 mm.

For veneered crowns

Used for crowns to be acrylic-veneered and the partial denture technique, in the case of lack of space also in place of loop retentions.

The green models for precious metal alloys; black for cobalt-chrome and all other non-precious metal alloys. Three different shapes.

Removable masking lacquer

Effectively protects clasp tips, attachment parts and other sensitive items during polishing. After polishing, Seculac is pulled off as a film.

For separating sprues

BEGO separating discs are high-strength and have a long service life. They ensure reliable separation of sprues thanks to high degree of rotational accuracy.

Medium grain

Considerably longer service life than ceramically bonded grinding stones.

Easy to adapt, adheres firmly and burns without residue. Sheet size: 17.5 x 8 cm, colour: green.

Fluorescent stains in Vita basic shades

• BeCe PRESS Stain fluor. Paste A-D allows you to reproduce any of the 16 Vita shades in combination with the selected ingot.

Stains with natural fluorescence

• BeCe PRESS provides a comprehensive range of matching stains to attain special shade effects.

Stains for characterization at the opaque stage

• BeCe PRESS

Tried and tested wax for modelling the bases of upper partial dentures. The stippled pattern gives the base a natural appearance, is very easy to adapt and adheres securely. Sheet size: 15 x 7.5 cm, colour: green.

Non clogging carbide chip coated burs have a unique design for removing soft reline material.

Available in 3 different shapes and fits most hand pieces.

Unparalleled strength, durability, and cutting efficiency.

BEGO's Terra Cutter is a non-contaminating, high-yield disc with the power for cut-off and finishing of partial frames, as well as C&B and non-precious alloys.

Customized enamel build-ups can be further characterized by applying transparent sections. Transpa Blue can be used for example to enhance the optical effect of the marginal ridges on the anterior teeth.

• BeCe PRESS

White gold solder for BEGO cobalt-chrome and BEGO nickel-chrome alloys, not suitable for metal-to-ceramic applications.

CE 0197

Melting interval: 1005-985 ºC, Soldering temperature: 1020 ºC, Flux: Fluxsol/Minoxyd.