Consumables

• Easy to clean.
• Durable silicone ring.
• Suitable for all investment materials for pressed ceramics systems.

Availability: BEGO-Press investment system 1 set consisting of mould base, silicone ring and mould cover.

For crown and bridge work

For making moulds with metal mould rings. With hard rubber base plate.

The quality of the material and the cutting geometry ensure high degree of removal and long service life. The cutters meet the ISO standard and are equally suitable for both plastic and metal.

Soldering rods for all cobalt-chrome partial denture alloys.

Melting interval: 1150-1100 ºC, Soldering temperature: 1180 ºC, Flux: Fluxsol.

Flux

Ready for immediate use in soldering precious-metal and non-precious metal alloys.

Improved Crucibles

For combination crucible (2)

Funnel former with reservoir for combination crucible.

For Fornax® ceramic tilting crucibles

For Fornax® ceramic melting crucibles

Special corundum blasting material of 99.6% aluminium oxide (110 µm)

Alpha-corundum with great hardness. The particles retain their angular shape until spent. Korox® meets the provisions of the German employers' liability associations.

Special corundum blasting material of 99.6% aluminium oxide (25 µm)

Alpha-corundum with great hardness. The particles retain their angular shape until spent. Korox® meets the provisions of the German employers' liability associations.

pecial corundum blasting material of 99.6% aluminium oxide (250µm)

Alpha-corundum with great hardness. The particles retain their angular shape until spent. Korox® meets the provisions of the German employers' liability associations.

Special corundum blasting material of 99.6% aluminium oxide (50 µm)

Alpha-corundum with great hardness. The particles retain their angular shape until spent. Korox® meets the provisions of the German employers' liability associations.

Crucible engobe for Fornax® - and Nautilus® ceramic melting crucibles

This prolongs the life of the crucible and reduces casting residues in the melting crucible.

Ideal for ceramic, quartz or gypsum crucibles

Prolongs the life of the crucible and reduces casting residues in the melting crucible should read A coating of Lolipot greatly increases the life of the crucible, reduces residues and saves wasted alloy left behind after casting.

Application of the measuring instruments in connection with partial denture technique for model analysis, measuring undercuts and marking the equator.

For crown and bridge work

Metal mould ring size 1 for 60 g of investment material. Long service life thanks to special steel design. Suitable for all BEGO crown and bridge investment materials.

Flux

For soldering precious-metal alloys and precious to cobalt-chrome or nickel-chrome. It saves intermediate soldering and provides strong joints that hold up even under great stress and strain. Minoxyd is also used for soldering metal-to- ceramic alloys in the furnace after firing the ceramic.

The set contains the most important instruments for dental technicians. Ideal for trainees! The instruments are also available individually.

Eliminates fixing and grinding of the investment models when the BEGO combination duplicating flask is used.

Blasting material for blast-polishing (125 µm)

Perlablast® consists of tiny lead-free soda glass beads that produce an even silky finish. There is no metal loss because the surface is compacted rather than abraded. No further finishing is required for surfaces that need not be polished. Perlablast® is used for all crown and bridge alloys to give a mat finisch to the chewing surfaces.

• Time savings in relation to mould systems with foil sleeve, iron ring, etc..
• Compatible with Rapid Wax System.
• Minimal wear, thus lower costs than with comparable systems.
• Universally applicable for many casting systems.
• Easy separation of mould and mould ring.
• For all BEGO crown and bridge investment materials.

Removable masking lacquer

Effectively protects clasp tips, attachment parts and other sensitive items during polishing. After polishing, Seculac is pulled off as a film.

White gold solder for BEGO cobalt-chrome and BEGO nickel-chrome alloys, not suitable for metal-to-ceramic applications.

CE 0197

Melting interval: 1005-985 ºC, Soldering temperature: 1020 ºC, Flux: Fluxsol/Minoxyd.

White gold solder for BEGO cobalt-chrome partial denture alloys

CE 0197

Melting interval: 920-890 ºC, Soldering temperature: 930 ºC, Flux: Minoxyd.

White gold solder for furnace soldering after firing BEGO cobalt-chrome and BEGO nickel-chrome metal-to-ceramic alloys.

CE 0197

Melting interval: 770-730 ºC, soldering temperature: 860 ºC, Flux: Minoxyd.

Soldering rods for Wirobond® C

CE 0197

Melting interval: 1150-1100 ºC, Soldering temperature: 1180 ºC, Flux: Fluxsol.

Soldering rods for all BEGO nickel-chrome alloys

Melting interval: 1150-1020 ºC, Soldering temperature: 1165 ºC, Flux: Fluxsol.